TracFone APN Settings: Complete Setup Guide for Android & iPhone (2025)

If your TracFone data is not working, slow, or you cannot send MMS picture messages, the problem is almost always incorrect APN settings. This guide walks you through the exact TracFone APN settings for Android and iPhone so you can get connected in minutes.

What Are APN Settings?

APN stands for Access Point Name. It is a gateway setting that tells your phone how to connect to your carrier’s mobile data network. Without the correct APN, your phone may have no data, no MMS, or very slow speeds even when you have a signal.

TracFone APN Settings for Android

TracFone operates on multiple networks including AT&T, T-Mobile, and Verizon. Check your SIM card packaging or dial *#*#4636#*#* to see your network type.

TracFone APN Settings (AT&T Network)

• Name: TracFone
• APN: tfdata
• MMSC: http://mms-tf.net
• MMS Proxy: mms3.tracfone.com
• MMS Port: 80
• MCC: 310
• MNC: 410
• Authentication Type: PAP
• APN Type: default,mms,supl

TracFone APN Settings (T-Mobile Network)

• Name: TracFone T-Mobile
• APN: wap.tracfone
• MMSC: http://mms.tracfone.com
• MMS Proxy: 68.28.31.7
• MMS Port: 80
• MCC: 310
• MNC: 260
• APN Type: default,mms,supl

TracFone APN Settings (Verizon Network)

• Name: TracFone Verizon
• APN: vzwinternet
• MMSC: http://mms.vtext.com/servlets/mms
• MMS Port: 80
• APN Type: default,mms,supl

How to Change APN Settings on Android

1. Open Settings on your phone.
2. Tap Connections or Network & Internet.
3. Tap Mobile Networks, then Access Point Names.
4. Tap the + (Add) button.
5. Enter the APN settings that match your network from the tables above.
6. Tap the menu and select Save.
7. Select the new APN by tapping the radio button next to it.
8. Restart your phone and test your data.

TracFone APN Settings for iPhone

iPhones do not allow manual APN editing. TracFone pushes APN settings automatically when you insert the SIM. If data is not working on your iPhone, try these steps:

1. Remove and re-insert your TracFone SIM card.
2. Connect to Wi-Fi and go to Settings > General > VPN & Device Management.
3. Check if a TracFone carrier profile is installed and active.
4. If no profile is installed, contact TracFone at 1-800-867-7183 to push the carrier settings.
5. Try Settings > General > Reset Network Settings as a last resort.

TracFone Data Not Working? Try These Fixes

• Restart your phone after saving the APN settings.
• Toggle Airplane Mode on and off to reconnect to the network.
• Check your TracFone plan to confirm it includes mobile data.
• Verify your phone is unlocked — a locked phone from another carrier will not work with TracFone.
• Contact TracFone support at 1-800-867-7183 if the problem persists.

Frequently Asked Questions

What network does TracFone use?

TracFone is an MVNO that uses the AT&T, T-Mobile, and Verizon networks depending on your SIM card and location. Check your SIM packaging or go to Settings > About Phone > SIM Status to confirm.

Why is my TracFone data so slow?

Slow TracFone data can be caused by incorrect APN settings, network congestion, hitting your high-speed data limit, or weak signal. Start by confirming your APN settings match the ones listed above for your network.