Are you having trouble pairing your Crusher Wireless headphones? Don’t worry, it’s easy.
Quick Steps Summary – All you need to do is press and hold the power button on your headphones for about 5 seconds. You’ll know you’re in pairing mode when the LED light on the headphones starts flashing red and blue. Voila! You’re now ready to connect your headphones to a new device.
Now, I will walk you through the step-by-step process to put your headphones in pairing mode and some basic troubleshooting for common issues when pairing, so you can connect and enjoy your music without a hassle.
Steps to Put Crusher Wireless in Pairing Mode
When connecting your Crusher Wireless headphones to a phone or any other device for the first time, you must put them in pairing mode to make them discoverable.
Here is a simple guide to help you pair your headphones:
- First, make sure your headphones are turned off. If they’re on, power them off by pressing and holding the power button for about three seconds until the LED indicator flashes red and blue.
- Locate the circular button with the Bluetooth symbol on the left earcup. This is the pairing button.
- Press and hold the pairing button for approximately five seconds until the LED indicator light starts flashing blue, and you hear a voice prompt that says, “Pairing.”
- Open the Bluetooth settings on your device and select Crusher Wireless to pair and connect. If your headphones don’t appear in the list, try refreshing the page, turning off Bluetooth on both devices, and then turning it back on to try pairing again.
- Once your headphones are paired and connected, the LED indicator will turn solid blue, and you’ll hear a voice prompt that says, “Connected.”
Pairing Your Crusher Wireless with a Device
Pairing your Crusher Wireless headphones with a device is straightforward and effortless. Once you pair the headphones with your smartphone or another device, you’ll be bopping to your favorite tunes in no time.
Below is a table for a simple guide to help you pair your headphones with different devices:
| Pairing with Android | Pairing with iPhone/iPad | Pairing with Windows 10 | Pairing with MacOS | Pairing with Chromecast built-in Bluetooth | Pairing with PS4 | |
|---|---|---|---|---|---|---|
| 1 | Ensure Bluetooth is turned ON in the settings | Go to Settings and turn Bluetooth ON | Go to Settings > Devices > Bluetooth & other devices | Go to System Preferences > Bluetooth | Ensure your Chromecast device is ON | Turn on your PS4 |
| 2 | Go to “Bluetooth” in the settings | Open “Bluetooth” in Settings | Click on “+ Add Bluetooth or other devices” | Turn Bluetooth ON | On your mobile device, open the Google Home app | Go to Settings > Devices > Bluetooth Devices |
| 3 | Hold the power button on Crusher Wireless headphones until the LED light flashes | Hold the power button on Crusher Wireless headphones until the LED light flashes | Hold the power button on Crusher Wireless headphones until the LED light flashes | Hold the power button on Crusher Wireless headphones until the LED light flashes | Go to the device settings for your Chromecast device | Ensure Bluetooth is enabled |
| 4 | Your phone will start searching for available devices | Your iPhone/iPad will start searching for available devices | Click on “Bluetooth” in the Add a Device window | Your Mac will start searching for available devices | Tap on Paired Bluetooth devices | PS4 will start scanning for Bluetooth devices |
| 5 | Select “Crusher Wireless” from the list | Select “Crusher Wireless” from the list | Select “Crusher Wireless” from the list | Select “Crusher Wireless” from the list | Tap on “Enable Pairing Mode” at the bottom of the screen | Select “Crusher Wireless” from the list |
| 6 | If connected successfully, it will show “Connected” | If connected successfully, it will show “Connected” | If connected successfully, it will show “Connected” | If connected successfully, it will show “Connected” | The headphones will now appear in the list of available devices | If connected successfully, it will show “Connected” |
| 7 | If the connection fails, try the “Forget this device” option and repeat the process | If the connection fails, try the “Forget this device” option and repeat the process | If the connection fails, remove the device and repeat the process | If the connection fails, remove the device and repeat the process | If the connection fails, try resetting the Bluetooth settings | If the connection fails, delete the headphones and try pairing them again |
Please note: The steps above may vary slightly depending on your device model or operating system version. Ensure you run the latest software or firmware updates to optimize Bluetooth performance and compatibility.
If issues persist, consider consulting your device’s user manual or contacting the manufacturer’s customer service for more detailed assistance.
In the meantime, below are some troubleshooting tips for some common issues encountered when pairing Crusher Wireless.
Common Issues When Pairing with Crusher Wireless and How to Fix Them
Issue 1: Crusher Wireless Won’t Enter Pairing Mode
If you’re having trouble getting your Crusher Wireless headphones into pairing mode, the solution is simple:
- Turn off all other Bluetooth devices in the area.
- Press and hold the “+” and “-” buttons on the headphones until the LED light starts flashing.
- Release the buttons, and the headphones should enter pairing mode.
Issue 2: Crusher Wireless Won’t Pair with Device
If you’re having trouble pairing your headphones with your device, try these troubleshooting steps:
- Make sure Bluetooth is turned on and your device is discoverable.
- Ensure the headphones are charged.
- Clear the device and headphone pairing history, then try connecting again.
Issue 3: Crusher Wireless Keeps Disconnecting
If your headphones keep disconnecting during use, here are a few things you can try:
- Move your device and headphones closer together.
- Make sure there are no obstructions between the headphones and the device.
- Ensure that your headphones are fully charged.
- Reset the headphones and reconnect.
I hope these tips help you resolve issues when pairing your Crusher Wireless headphones with your device. Remember to update your headphones regularly by checking for firmware updates to maintain their quality and optimal performance.
References
Organizations:
- Bluetooth SIG. https://www.bluetooth.com/
Websites:
- Skullcandy Support. https://support.skullcandy.com/hc/en-us
- TechRadar. https://www.techradar.com/
- PCMag. https://www.pcmag.com/
Video References
Skullcandyoz
Skullcandy